Planting a new tree seedling seems simple enough: dig a hole and plant the tree. However, several critical steps are needed when selecting, storing, handling and planting tree seedlings to sustain your forestland. This leaflet only briefly outlines some of the basic steps. For detailed specifications and explanations, please refer to the booklet “Pocket Guide to Seedling Care & Planting Standards”, available from your County Forest Ranger office. You can also seek advice from a Registered Forester, tree planting specialist or the N.C. Forest Service.

Selecting Tree Seedings

Tree seedlings are available from commercial nurseries and from the N.C. Forest Service’ state nurseries. Consider these factors when selecting seedlings to plant on your forestland:

Storing Tree Seedlings

Generally, seedlings should be planted as soon as you receive them. However, in ideal conditions of between 35°F to 38°F, most seedlings can be stored for several weeks. One exception is longleaf pine, which should be planted within 7-to-10 days of leaving the nursery.

Handling Tree Seedlings

Handle seedlings with care! Seedlings are delicate and can easily snap, have their thin bark stripped off, or fine roots damaged. Do not plant a seedling that has sustained damage.

Planting Tree Seedlings

Planting is generally done during the dormant (winter) season. However, in late fall certain species may be “hot planted”, which means the seedlings are planted on your forestland immediately after being removed from the tree nursery. In addition, some containerized seedlings can be planted in late fall or early spring, depending on soil and weather conditions.

Use the correct tool for planting the seedling. Several types of digging spades (“planting bars”) can be used. A shovel can also be used. Visit the N.C. Forest Service office in your county to get free advice on selecting the right tool and a demonstration on proper use of the planting tool. Some offices may have planting bars or shovels you can rent.

Do not plant trees on days that are windy, have low humidity or temperatures above 85ºF. Plant trees when soil conditions are favorable. Avoid saturated soils with standing water, frozen soils or very loose, dry soils that have little soil moisture. During the planting season, you can call your N.C. Forest Service county office to obtain the daily tree planting weather forecast.

Steps for planting a tree seedling:

  1. Dig a fairly straight hole from 8-to-10 inches deep and from 4-to-5 inches square. The hole should be deep enough and wide enough for all the seedling roots to fit without forcing them in.
  2. Remove only one seedling at a time from its package or planting bag. Carefully separate the seedlings to avoid damaging the roots. Examine the seedling to assure it is a quality seedling (see “Handling Tree Seedlings” above). Discard poor quality seedlings.
  3. Insert the root system to the bottom of the hole, then slightly lift up the seedling to its desired planting depth. This technique improves the likelihood of keeping the tree roots straight and avoiding J-shaped or L-shaped roots. The “root collar” is the transition between the tree-stem and the root-stem. The root collar should be slightly below the ground surface. Longleaf pine requires that the base of the seedling bud is at ground level and the root collar is completely below ground.
  4. Hold the seedling upright while closing the hole. First, insert the tool behind the seedling hole and tilt back to close the bottom of the hole. Then, with the tool still inserted in the soil, push the tool forward to close the top of the hole. Finally, gently pack the soil with your foot to close any remaining hole.

Download

Published By

Published in March 2009

Learn More About…